Clopay Garage Doors
- What is Alpha One Door Systems?
- What is headroom?
- My garage door has a window section. Do I have a choice as to where that section is placed?
- When referring to steel gauge, does a lower number mean thicker steel?
- Can I paint my Clopay garage door?
- What tools will I need to install my garage doors?
- I hear a lot about R-value. What is it and is it important?
- How much headroom do I need?.
- I do not have the necessary amount of headroom. Is there something I can do?
- How much do garage doors cost?.
- I am getting ready to remove my old garage door, which has standard torsion springs. How can I get the tension off the springs?
- What is backroom?
- I do not have standard size door openings. Can Clopay create custom garage doors to fit my needs?
- I am building a new garage; what size should the rough opening for my garage door be?
- Can I just replace the garage door sections, and not use the new track and springs that came with it?
- Do I need to reinforce my garage door if I am installing an automatic garage door opener?
- My garage door “hangs” in the opening – is that normal? Can I fix it?
- What is sideroom?
- Does the Clopay garage door package include everything I need for proper installation?
- Does Clopay offer reinforced garage doors for high wind areas?
- How do I install my lockset?
- How do I install the struts provided with my garage door?
- My garage doors have no insulation; how can I fix this?
- Does my garage door require maintenance?
- Can I fix my garage door myself?
- Are replacement sections available for my garage door?
- Can I install my old garage door opener on my new door?
- Can I install an Avante Collection garage door in a high wind area?
- I scratched my garage door. Is touch-up paint available?
- What type of spring system comes with my new garage door?
- What type of glass options are available for the Avante Collection garage doors?
- What horsepower garage door opener do I need for my garage door?
- Is the Gallery Collection available in WindCode?
- Are Coachman Collection garage doors offered with WindCode?
- Painting Information
- Where will Alpha One Door Systems provide services?
Alpha One Doors Systems is a family business specialized in Doors (both Entry and garage Doors). Our main goal is to offer quality job. We know that making our customers happy and keeping their homes safe comes above all else. We are authorized distributors of Clopay and LiftMaster,some of the best and most trusted names in garage doors.
Headroom refers to the distance between the top of the door and the lowest point of the ceiling or any obstruction such as a garage door opener rail, pipes, or ductwork
The window section can be placed in either the third section (second from top) or the fourth (top) section
The lower the gauge, the thicker (and stronger) the steel. For example, 24-gauge steel is thicker than 27-gauge steel. However, a “sandwich” constructed door with two 27-gauge steel skins bonded to an insulated core is stronger than a “steel frame” door with a single 24-gauge steel skin.
Clopay's steel garage doors can be painted with any high quality exterior latex paint. Do not use an oil based paint. Note: click here for important information regarding the painting process for a Coachman Collection garage door. Wood garage doors must be painted/stained on all sides prior to installation. Most models are available factory primed. Clopay recommends wood garage doors be re-painted every 1 to 2 years (more frequent refinishing may be required in high moisture areas). For more details on painting and staining click here
- “C” Clamps or Locking Pliers
- Tape Measure
- Socket Wrench Kit
R-value is a measurement of thermal efficiency of a garage door, or how well it insulates. Insulation is an important factor to consider when purchasing a garage door. If you plan to spend a lot of time in your garage, or if you have a room directly above or adjacent to your garage, you will want to purchase a garage door that offers a high R-value. If your garage is not attached to your house, or you are not concerned with insulation, you can purchase a door with a lower R-value or no garage door insulation at all.
R-Value of Clopay Garage Door Models
Premium Steel 2" Polyurethane: 17.2
Premium Steel 1-3/8" Polyurethane: 12.9
Premium Steel 2" Polystyrene: 9.0
Premium Steel 1 3/8" Polystyrene: 6.5
Gallery Collection 2" Polyurethane: 17.2
Gallery Collection 1 3/8" Polyurethane: 12.9
Gallery Collection 2" Polystyrene: 9.0
Gallery Collection 1 3/8" Polystyrene: 6.5
Coachman™ Collection 2" 9.0
Coachman™ Collection 1-3/8" 6.5
Grand Harbor 2" 6.3
Classic Line Wood Flush Design 1-1/8" 5.9
Please ask us any question you may have for specific case.
It depends on the type of spring system that will be installed with your new garage door. For extension springs, a minimum of 10" is required for your garage doors to operate. Torsion springs require 12". Remember, these amounts are for garage door operation only. If you are installing a garage door opener, additional headroom is required. Check with the opener manufacturer for additional headroom requirements.
Yes! Low headroom kits are available from your local garage door dealer or retailer. If your garage doors came with extension springs, the necessary headroom can be reduced to 4-1/2”. Torsion spring systems can be reduced to 4-1/2”. For more information, refer to the Low Headroom Options file listed in our Installation Manuals.
The cost of a garage door depends on a number of factors such as: the model, size, material, decorative options and site conditions. Because Clopay garage doors are sold exclusively through our network of distributors, they are better able to provide you with the most up-to-date pricing. Most of our distributors also install the garage doors for you, so the final quote you receive should be the "installed price." Call AlphaOne Door Systems at (416) 837-7668 or (905) 542-0819 and we will gladly give you an estimate.
I am getting ready to remove my old garage door, which has standard torsion springs. How can I get the tension off the springs?
Unwinding standard torsion springs requires specific tools and training. Due to the dangerous nature of this process, we recommend you contact a local garage door professional to remove the tension from the springs.
Backroom refers to the distance from the garage door to the back wall of the garage. The door height plus 18" is required for proper door installation. Additional backroom is required for the installation of an automatic garage door opener.
Standard door widths are 8', 9', 10', 12', 14', 15', 15'6", 16', and 18'. Some models can be custom ordered in 2" increments (8'2", 8'4", 8'6", etc.). Check with your local dealer or retailer for custom garage doors width/model availability. Standard door heights are from 6' to 8' in 3" increments, except for 7'3". Most residential garage doors are now available in extended heights up to 12". Check with your local dealer or retailer for custom garage doors extended height/model availability.
The rough opening should be the same size as the garage door you wish to purchase. The garage door fits against the opening from the inside. The rough opening should be finished with an exterior perimeter seal or stop molding to seal out rain and wind. For more information, please refer to the Preparing the Opening file listed on our Installation Manuals page.
Can I just replace the garage door sections, and not use the new track and springs that came with it?
To avoid installation problems that could result in personal injury or property damage, use only the track and springs specified and supplied with your new garage door. Do not attempt to reuse the old track, springs, or hardware. Failure to use all supplied hardware will void the factory warranty.
Yes! Failure to properly install opener reinforcement will result in damage to the garage door and will void the warranty. The reinforcement configuration differs depending on the model number and size of the garage door. Refer to the installation manual supplied with our garage doors for specific instructions. For more information, see the "Attaching an Automatic Opener to "Pan Construction" Garage Doors Using Punched Angle" file listed on the Installation Manuals page, available here or "Attaching an Automatic Opener to "Sandwich Construction" Garage Doors Using Punched Angle," available here.
Normally, garage doors will hang about 4 to 6 inches into the opening. This helps keep tension on the cable so it does not separate from the cable drum or pulley. If your garage door operates with an electric opener, it can be adjusted so the door is pulled completely even with the opening, if necessary, to provide additional clearance for a vehicle.
Sideroom refers to the measurement from each side of the garage door opening, outward to the nearest wall or obstruction within the garage. Allow 3-3/4" on either side of the door for standard extension and torsion springs installation and 5-1/2" for EZ-SET extension springs.
The Clopay garage door package includes the sections, track, spring assembly, and hardware required for door installation. Additional items can be purchased from your local dealer or retailer to aid in installation including: 1. Rear track hanger kit for attachment of the horizontal track to the ceiling in the back of the garage. Existing hangers generally can be reused. However, we do recommend that you inspect them to ensure they are in good condition and positioned properly for the new installation. 2. Stop molding or perimeter seal for the exterior sides and top of the opening. 3. Some garage door models do not include the opener reinforcement bracket. This can be done with a reinforcement kit or it can be done with standard 13-gauge punched angle iron. See our garage doors installation manual for details. 4. Low headroom hardware. This is required when there is limited headroom between the top of the door and the ceiling or roof rafters.
Yes. These garage doors feature added steel reinforcement struts, upgraded springing and heavy-duty commercial grade track and rollers to meet wind speeds and gusts from 75 mph to 170 mph. Your local building code authority can provide information on the windload rating required in your county.
For lock bars please refer to the "Lock Bar Assembly Instructions" file listed on the Installation Manuals page, or click here. For a cable lock please refer to the "Snap Latch Lock Assembly Instructions" file listed on the Installation Manuals page or click here.
Please refer to the "Installing Struts" file listed on the "Installation Manuals" page.
Garage door insulation kits for most of our products are available from your local dealer or retailer.
Your garage door is the largest moving part on your home, and perhaps the hardest working, being raised and lowered an average of six times per day. Like any other area of the home, it needs regular inspections and maintenance. We suggest that you perform the recommended garage door maintenance as listed in your installation manual on an annual basis.
Clopay garage doors are built to last, but some parts do occasionally wear out or become damaged. If you are reasonably handy and follow the detailed instructions in your installation manual, you can do some repairs yourself. Some of the parts that may require repair include rollers, bottom seal, hinges, lift handles, windows and window inserts. However, we strongly recommend that replacing springs, door sections, tracks and operators be handled by a garage door professional. See the "Installation and Care" and "Teach Me About Garage Doors" section on our website for additional information.
Yes, replacement sections for Clopay steel garage doors and Clopay wood garage doors are available from your local dealer or retailer provided we still manufacture the door model you own. If your door was manufactured in the last ten years, we can identify the model by referencing the 15 to 16 digit serial number located on the interior bottom section of the door. Exposure to the elements can alter the color of a garage door over time; so the replacement section may not be a perfect match. Due to the custom assembly of our Coachman Collection carriage house style garage doors, certain restrictions apply for replacing sections. Consult your local distributor for details.
Just about any opener can be installed with your new garage doors, however, we recommend that you first check with the opener manufacturer to find out if the unit you own meets current government safety standards as required by law. Once you verify that the unit is in compliance, you can begin the project. And remember: reinforce your garage doors before attaching the automatic opener!
It depends on the local building code requirements for your area.The Avante Collection is available in a W1 rating up to 14' wide, and in a W5 rating up to 20'2" wide. Refer to our WindCode section for specific details.
Touch-up paint is available for nearly all of our garage door models from your local dealer or retailer.
Garage doors purchased through retail chains are generally supplied with standard extension springs on single car garage doors (10' wide and under) and EZ Set torsion springs on two-car doors (garage doors over 10' wide). Professional dealers will install the spring that is best suited for the site conditions. Consult your local dealer or retailer to determine the type of spring system that comes standard with your door.
Tempered glass panels are available in either DSB or insulated. Acrylic windows and aluminum panels are also available. We can also accommodate special order glazing requests. Consult your local Clopay dealer or retailer for more information.
Generally, a 1/3 horsepower opener is sufficient for a single-car garage door. A 1/3 or 1/2 horsepower opener is recommended for some of the heavier two-car garage doors. A minimum 1/2 horsepower is required for all Clopay Reserve Collection carriage house style wood garage doors. Remember to reinforce the garage door prior to attaching the garage door opener.
Clopay's Gallery Collection is available with WindCode reinforcement. Refer to the WindCode section for specific information.
Clopay Coachman Collection steel carriage house style garage doors are available in W4, W5 and W6 WindCode categories. Consult your local dealer or building inspector for specific code requirements in your area.
Overlays and Exterior Steel skin can be painted using a high quality exterior latex paint. Overlays may be painted dark colors with a light Reflective Value (LRV) of 8 or higher. Check the back of your Coachman Collection Door to see which of the following labels is attached. Please note: If you have the orange label your door was purchased some time ago and has different painting instructions.
Click on the respective label for full custom painting instructions.
We provide sales and service for entry doors and garage doors in Oakville, Mississauga, Burlington, Milton, Georgetown, Brampton, Etobicoke and surrounding areas.